Ejector Pump Installation Near Me

Starting price: Call for pricing

A basement bathroom or laundry below the sewer line can't drain by gravity — it needs an ejector pump. Plumbing Services Usa installs a sealed sewage basin and ejector pump that lifts wastewater up to the main sewer line, vented and fitted with a check valve so nothing flows back. Call (833) 805-3185 to make a below-grade bathroom or laundry room drain right.

## When you need an ejector pump Any fixture that sits below the level of the main sewer line — a basement toilet, shower, or washing machine — can't drain downhill, because downhill doesn't exist. A sewage ejector system solves this with a basin set into the floor: fixtures drain into it by gravity, and when the water reaches the float, the pump lifts everything up and over into the sewer line. It's the standard setup for basement bathrooms, basement laundry rooms, and wet bars with sinks. ## The parts of the system The heart is a sealed basin with a solids-handling pump — not a sump pump, which would clog on the first flush. A vent line runs up and ties into the home's vent system so the basin can breathe and drains flow smoothly. The discharge pipe climbs to the ceiling and over to the sewer line, with a check valve to stop sewage from falling back into the basin and a gate valve so the pump can be serviced without draining the line. The basin lid bolts down on a gasket to keep odors sealed in. ## Sizing it to the fixtures A toilet and sink ask less of the pump than a full bathroom plus a washing machine, so we size the pump and basin to the real load. Too small and the pump short-cycles and wears out; too big and it costs more than the job needs. Plumbing Services Usa counts the fixtures, checks the lift height to the sewer line, and picks a pump with the head and flow to match. The alarm float gets wired too, so you'll hear it if the level ever climbs too high. ## Installation and testing The basin goes in below floor level with the concrete cut and patched around it, the discharge and vent are piped, and every joint is checked. Before the floor is closed up, we fill the basin with water and run the pump through full cycles — float on, pump out, check valve holding — so the whole system is proven while it's still visible. Call (833) 805-3185 to scope an ejector system for your basement; the fixture count and the lift height are what set the job.

Features

• Sealed sewage basin set below floor level to collect fixture drains
• Solids-handling ejector pump sized for the fixtures it serves
• Vent line tied into the home's vent system for proper air flow
• Check valve and gate valve on the discharge for backflow control and service access
• Gasketed, bolted basin lid that seals odors in
• Discharge pipe routed up and over into the main sewer line
• Float and alarm wiring tested with water before backfill

Benefits

• A working basement bathroom or laundry where gravity drainage is impossible
• Sealed basin and venting that keep sewer odors out of the house
• Backflow protection built into the discharge line
• Pump sized for the real fixture load — toilet, shower, sink, washer
• Service valves that make future maintenance straightforward
• Tested with water before the floor is closed up
• A system built to handle solids, not just gray water

Call (833) 805-3185 or contact us to get started.